Package includes:

• 1 x Mini In-line LED Light Controller/Dimmer
• 1 x RF Wireless Remote Controller R106

About RF Wireless Remote

1. Power Supply:
   This unit accepts DC 5V to 24V power supply. The red cable should be connected to positive and black cable to negative.
   Please select proper power supply according to the LED application.
2. LED Output:
   The red cable should be connected to LED positive and black cable to negative. The peak output current is 12A, please reduce load if main unit is overheating.
   CAUTION:Do not short circuit the LED output, this may lead to permanent damage!
3. Remote Control:
   Please pull out the insulate part before using. The RF wireless remote signal can pass through barrier, so it\’s not necessary to aim at the main unit when operate. For proper receiving remote signal, do not install the main unit in closed metal parts. The remote battery is 3V CR2025 type, please only replace with same type battery.

• This product is powered with a button battery.
• Keep out of reach of children.
• Swallowing a button battery may lead to serious injury or death in as little as two hours due to internal burns.
• If swallowed, go straight to a hospital emergency room.
• Dispose of used batteries immediately.